FreedomBox/Tips and Tricks: Difference between revisions

From Wiki
(→‎Increase Storage with Additional Volumes: Fix syntax highlighting and add a few comments)
(→‎Increase Storage with Additional Volumes: Add screenshot of storage app)
Line 198: Line 198:
# Cancelling this operation should have no impact.
# Cancelling this operation should have no impact.
</syntaxhighlight>
</syntaxhighlight>
After adding the external volume, you can see that the root partition's size has grown significantly.
[[File:Btrfs-expanded-root-partition.png|1000x546px|frameless|Screenshot of FreedomBox Storage app]]

Revision as of 06:56, 4 October 2020

Tips and Tricks

Software

  • Matrix Synapse can be used for voice and video calls over LAN or over the Internet (with Coturn server).
  • Use Privoxy for ad-blocking on all the Android devices on the Wi-Fi by setting it as a proxy.
  • Ikiwiki can be used as a bug tracker. example

Syncthing

  • Use Syncthing with Orgzly/Emacs for writing lists.
  • Use Boostnote with Syncthing for note-taking and lists if Orgzly seems too weird. Boostnote has Github-flavored markdown.
  • When adding your FreedomBox as a device in other Syncthing clients, set the address like "tcp://njoseph.me" instead of "dynamic". This allows your Syncthing peers to directly connect to your FreedomBox avoiding the need for relays. It also allows for fast on-demand syncing if you don't want to keep Syncthing running all the time on your mobile devices.

Tor

  • The Tor daemon running on FreedomBox can be used as a local SOCKS v5 proxy that your devices can connect to. Firefox running on my home computer is permanently connected to this proxy. I use an extension called FoxyProxy to switch the proxy on and off easily.
  • With the SOCKS v5 proxy configured, you can now access any onion URL directly from Firefox. FreedomBox itself has an onion v3 address that you can connect to over the tor network. Since freedombox.local is flaky and cockpit doesn't work with direct IP addresses (a bug which might be fixed soon), I have bookmarked the FreedomBox onion address in Firefox and using that primarily to access my FreedomBox.


MediaWiki

  • Use MediaWiki for taking notes as I'm doing right now and as a personal knowledge base.
  • Since MediaWiki on FreedomBox doesn't have the Visual Editor extension yet, use Wikipedia's Sandbox to write your content in the Visual Editor, and after you're done, switch back to source code editing mode. You can then cut and paste the content into your MediaWiki instance.
  • If you want to use an Indic language in your MediaWiki installation, you will need the extension UniversalLanguageSelector


Manually install the VisualEditor extension

The following instructions assume you're using the Debian package for MediaWiki 1.30

  1. Install the Debian packages php-curl and dirmngr
  2. Follow the setup instructions given for Debian in the Parsoid Setup page.
  3. Make this change for MediaWiki 1.30 (and remove it after upgrade to 1.31)
  4. The url in /etc/mediawiki/parsoid/config.yaml should be http://localhost/mediawiki/api.php
  5. Restart parsoid service by running systemctl restart parsoid
  6. Download and install VIsualEditor extension for MediaWiki 1.30
  7. Add the following lines in your /etc/mediaWiki/LocalSettings.php file
# VisualEditor config
wfLoadExtension( 'VisualEditor' );
$wgDefaultUserOptions['visualeditor-enable'] = 1;

$wgVirtualRestConfig['modules']['parsoid'] = array(
  // URL to the Parsoid instance - use port 8142 if you use the Debian package - the parameter 'URL' was first used but is now deprecated (string)
  'url' => 'http://localhost:8142',
  // Parsoid "domain" (string, optional) - MediaWiki >= 1.26
  'domain' => 'localhost',
  // Parsoid "prefix" (string, optional) - deprecated since MediaWiki 1.26, use 'domain'
  'prefix' => 'localhost',
  // Forward cookies in the case of private wikis (string or false, optional)
  'forwardCookies' => false,
  // request timeout in seconds (integer or null, optional)
  'timeout' => null,
  // Parsoid HTTP proxy (string or null, optional)
  'HTTPProxy' => null,
  // whether to parse URL as if they were meant for RESTBase (boolean or null, optional)
  'restbaseCompat' => null,
);



Tiny Tiny RSS

  • Tiny Tiny RSS web UI is unpalatable for people used to things like Medium, but the official Android app is really good.
  • Follow medium blogs using Tiny Tiny RSS without having to create an account.
  • Follow activity feed from GitLab sites (e.g. Debian Salsa) using TT-RSS.
  • Backup Tiny Tiny RSS feeds list (the opml file) to a Syncthing folder.
  • Add feed subscriptions to Tiny Tiny RSS from Firefox.


Other use cases

  • Music streaming using SFTP
    Put your music or video content in a directory on your FreedomBox. Open Dolphin or Konqueror (KDE) or Nautilus on Gnome and enter this kind of url in the file path text box
    sftp://username@my.freedombox.rocks:/path/to/my/media
    You should be able to browse media. Now right click on a file -> "Open with VLC" (or mpv or any player that supports streaming over the network). You can also enqueue multiple files into a playlist (I see a right-click option called "Enqueue in SMPlayer").
  • Public file sharing from FreedomBox
    FreedomBox comes with the Apache userdir module enabled by default. You can create a directory for your user called public_html in your user's home directory and place your files there. See my publicly shared files at https://njoseph.me/~joseph/
  • Personal website for each user
    Every user on a FreedomBox gets the option to host a website by default.
    Steps:
  1. SSH into your FreedomBox
  2. Create a directory called ~/public_html
  3. Place the files of your website in the above directory

Your website will be available on the path ~username on your FreedomBox, e.g. https://familyname.host/~username


Hardware

  • Make sure the device is getting adequate power supply (e.g. 2 Amp for a Raspberry Pi) or the performance will suffer.
  • Your microSD card's speed impacts performance of your FreedomBox more than anything else. Make sure to buy something fast enough (UHS 1 or more).
  • microSD cards are unreliable in general. Make sure to keep a dd backup of the entire SD card to another computer frequently.


Raspberry Pi 3 Wi-Fi Access Point

Raspberry Pi 3 comes with a built-in Broadcom Wi-Fi module. The firmware for this is non-free and must be installed manually on FreedomBox.

Run the commands in the following steps on the FreedomBox using ssh.

  1. A file must be added to the firmware directory first.
cd /lib/firmware/brcm/
wget https://raw.githubusercontent.com/RPi-Distro/firmware-nonfree/54bab3d6a6d43239c71d26464e6e10e5067ffea7/brcm80211/brcm/brcmfmac43430-sdio.txt
  1. Make sure that non-free is enabled in /etc/apt/sources.list
  2. Install the package firmware-brcm80211
  3. reboot or run rmmod brcmfmac && modprobe brcmfmac

After this, if you run the 'ip addr' command, you should see a new 'wlan0' interface come up.

Go to Plinth -> Networks -> Add WiFi, select device, give any name, set ssid, set infrastructure mode, ipv4 shared mode and set access point password. Then activate connection to get Wi-Fi access point from FreedomBox.



Unsupported Software

NextCloud

NextCloud is a Google Drive replacement that

  • can update itself
  • can play a lot of multimedia formats and display epub files
  • has a simple project-tracking tool similar to Trello
  • can be a personal content server with streaming capabilities
  • can be used as a CalDAV/WebDAV server (contacts and calendar sync)
  • can store your bookmarks
  • has cool mobile apps


Pioneer Edition

Emergency Reboot

The Pioneer Edition FreedomBox is hard to reboot if don't have console or network access to it. You can't pull the plug since it has built-in battery backup. Also, there's no reboot button provided. One way of triggering a reboot is connecting a keyboard and pressing Ctrl+Alt+Del.

Increase Storage with Additional Volumes

The Pioneer Edition of FreedomBox ships with limited storage which one might quickly run out of if using apps with high storage requirements. Many apps in FreedomBox store their data under /var/lib/<app-name> and do not support writing to external storage. One way of getting around this problem is mounting a separate disk under /var. However, the BTRFS filesystem in FreedomBox provides better options.

  • Take an external hard disk and delete any partitions on it using gparted or fdisk.
  • Connect the disk to your FreedomBox
  • SSH into your FreedomBox and run the following commands
# Escalate to root
joseph@freedombox:~$ sudo su -
[sudo] password for joseph: 

# Find out the device name of the external disk.
root@freedombox:~# fdisk -l
Disk /dev/mmcblk0: 29.7 GiB, 31914983424 bytes, 62333952 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x9ab710ef

Device         Boot  Start      End  Sectors  Size Id Type
/dev/mmcblk0p1 *      2048   264192   262145  128M 83 Linux
/dev/mmcblk0p2      266240 62333951 62067712 29.6G 83 Linux

Disk /dev/sda: 931.5 GiB, 1000204885504 bytes, 1953525167 sectors
Disk model: Backup+ BK      
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x9ab710ef

# Add the new volume to the root partition.
# The-f option is to delete any remaining partitions on the volume.
root@freedombox:~# btrfs device add /dev/sda / -f

# Spread metadata across the two volumes.
# This step is optional. Can also be done later.
root@freedombox:~# btrfs filesystem balance /
WARNING:

        Full balance without filters requested. This operation is very
        intense and takes potentially very long. It is recommended to
        use the balance filters to narrow down the scope of balance.
        Use 'btrfs balance start --full-balance' option to skip this
        warning. The operation will start in 10 seconds.
        Use Ctrl-C to stop it.
10 9 8 7 6 5 4 3 2 1
Starting balance without any filters.
# ... will be finished a very long time later
# Cancelling this operation should have no impact.


After adding the external volume, you can see that the root partition's size has grown significantly. Screenshot of FreedomBox Storage app